Sales

1998 Komatsu PC300LC-6 Excavator

232 HP
69,446 Pound Operating Weight
Max. Loading Height: 21.6 Feet
Max. Digging Depth: 20.8 Feet
Various Bucket Width Options Available

Kubota U17 Zero Tail Swing Compact Excavator

16.1 HP
3,703 Pound Operating Weight
Breakout Force: 3,417 Pounds
Max. Dumping Height: 8 Feet
Max. Digging Depth: 7 Feet 7 Inches
Bucket Width: 16 Inches

2017 Caterpillar 259D Compact Track Skid Steer Loader

74.3 HP
8,945 Pound Operating Weight
Breakout Force: 5,035 Pounds
Rated Operating Capacity: 2,030 Pounds

ESCO Standard Duty Plate Lip Attachment Bucket

$1,799.99

Used – Good Condition
Serial number RH96460
Carrier make is Komatsu, model is PC100/120-3/7
0.50 yard capacity x 24″ overall width
Original purchase price is $3,500.00

Hydraulic Winder Excavator Attachment

$7,999.99

Used – Very Good Condition
Heavy-Duty Attachment
Custom Made
Diameter of large wheel is 8′
Distance from the wind surface to the top tip is approximately 76″
Distance from the widest part of the vertical cone to the edge of the large wheel is 2′
Pin diameter size is 2.625″
The width between the ears (2 vertical side plates, or the length of pin that can be grabbed by the machine) is 10.25″
Center to center distance between the pins is 16.5″

IronWolf High Speed Slasher Model 8XP Attachment

$24,999.99

Used – Very Good Condition
Serial NumberĀ 8HSRM03708107
Purchased brand new in 2009 for $75,984.32
Diameter of large wheel is 8′
Originally mounted on a BRON 400 (BRON 400 NOT INCLUDED)

Power Requirements (HP): 400 (min.) – 550 (max.)
Hydraulic Flow (GPM): 190
Pressure (PSI): 3,500 (min.) – 4,500 (max.)
Cutting Width – 96 in. (2,438 mm)
Overall Width – 110 in. (2,794 mm)
Max. Drum Diameter – 29.5 in. (749 mm)
Tool Quantity: 100
Drum RPM: 700

Plate Lip Excavator Attachment Bucket

$1,499.99

Used
Custom Made
14″ wide x 60″ tall x 60″ deepest point
Pin diameter size is 3.25″
The width between the ears (2 vertical side plates, or the length of pin that can be grabbed by the machine) is 13″
Center to center distance between the pins is 18.5″

TRAMAC Trapac TR-21 Boom Mounted Hydraulic Plate Compactor

$3,499.99

Used – Good Condition
Custom Made
Serial number TR-74720221TS-21
It comes with a Nelson Machine made bracket cap and pins and a custom-made plate
Original purchase price is $7,720.70
Recommended Carrier Weight: 10-30 U.S. tons
Centrifugal (Impulse) Force: 15,000-21,500 pounds
Cycles per Minute: 2,000-2,300 RPM
Unit Weight (not including bracket cap): 1,500 pounds
Height (not including bracket cap): 26 inches
Baseplate Dimensions: 23.5 inches x 41 inches
Carrier Flow Range: 30-65 gpm
Carrier Minimum Hydraulic Pressure: 2,500 psi
Compactor motor controlled flow range: 30-34 gpm
Maximum compactor return line pressure: 250 psi
Maximum compactor operating pressure: 2,300 psi

This equipment is also available for rent

Rentals

1998 Komatsu PC300LC-6 Excavator

232 HP
69,446 Pound Operating Weight
Max. Loading Height: 21.6 Feet
Max. Digging Depth: 20.8 Feet
Various Bucket Width Options Available

Kubota U17 Zero Tail Swing Compact Excavator

16.1 HP
3,703 Pound Operating Weight
Breakout Force: 3,417 Pounds
Max. Dumping Height: 8 Feet
Max. Digging Depth: 7 Feet 7 Inches
Bucket Width: 16 Inches

2017 Caterpillar 259D Compact Track Skid Steer Loader

74.3 HP
8,945 Pound Operating Weight
Breakout Force: 5,035 Pounds
Rated Operating Capacity: 2,030 Pounds

Vermeer BC1000XL Brush Chipper

Infeed Throat Capacity: 12″ H x 17″ W
Feed Speed: 105 ft/min
Rotational Handle Discharge System with Pin Lock
Capacity: 5,200 Pounds with Pintle Type Hitch

ESCO Standard Duty Plate Lip Attachment Bucket

Used – Good Condition
Serial number RH96460
Carrier make is Komatsu, model is PC100/120-3/7
0.50 yard capacity x 24″ overall width
Original purchase price is $3,500.00

Hydraulic Winder Excavator Attachment

Used – Very Good Condition
Heavy-Duty Attachment
Custom Made
Diameter of large wheel is 8′
Distance from the wind surface to the top tip is approximately 76″
Distance from the widest part of the vertical cone to the edge of the large wheel is 2′
Pin diameter size is 2.625″
The width between the ears (2 vertical side plates, or the length of pin that can be grabbed by the machine) is 10.25″
Center to center distance between the pins is 16.5″

IronWolf High Speed Slasher Model 8XP Attachment

Used – Very Good Condition
Serial NumberĀ 8HSRM03708107
Purchased brand new in 2009 for $75,984.32
Diameter of large wheel is 8′
Originally mounted on a BRON 400 (BRON 400 NOT INCLUDED)

Power Requirements (HP): 400 (min.) – 550 (max.)
Hydraulic Flow (GPM): 190
Pressure (PSI): 3,500 (min.) – 4,500 (max.)
Cutting Width – 96 in. (2,438 mm)
Overall Width – 110 in. (2,794 mm)
Max. Drum Diameter – 29.5 in. (749 mm)
Tool Quantity: 100
Drum RPM: 700

Plate Lip Excavator Attachment Bucket

Used
Custom Made
14″ wide x 60″ tall x 60″ deepest point
Pin diameter size is 3.25″
The width between the ears (2 vertical side plates, or the length of pin that can be grabbed by the machine) is 13″
Center to center distance between the pins is 18.5″

TRAMAC Trapac TR-21 Boom Mounted Hydraulic Plate Compactor

Used – Good Condition
Custom Made
Serial number TR-74720221TS-21
It comes with a Nelson Machine made bracket cap and pins and a custom-made plate
Original purchase price is $7,720.70
Recommended Carrier Weight: 10-30 U.S. tons
Centrifugal (Impulse) Force: 15,000-21,500 pounds
Cycles per Minute: 2,000-2,300 RPM
Unit Weight (not including bracket cap): 1,500 pounds
Height (not including bracket cap): 26 inches
Baseplate Dimensions: 23.5 inches x 41 inches
Carrier Flow Range: 30-65 gpm
Carrier Minimum Hydraulic Pressure: 2,500 psi
Compactor motor controlled flow range: 30-34 gpm
Maximum compactor return line pressure: 250 psi
Maximum compactor operating pressure: 2,300 psi

This equipment is also available for sale